Support
- Total activity 73
- Last activity
- Member since
- Following 0 users
- Followed by 1 user
- Votes 0
- Subscriptions 18
Activity overview
Latest activity by Support-
Support created an article,
CMCV002 Hose diameter
The vacuum CMCV002 hose diameter is 1-1/4”. However, we do not offer a longer hose accessory. Adding longer hoses to this type of vacuum is not recommended. It will reduce the suction at the end of...
-
Support created an article,
CMMT99436 - Terminology on manual
The ‘ConU’ and ‘Send’ functions are only used by our calibration labs. They are under the loop when pressing the U/S button, so anyone could see them, but they are for the re-calibration process.
-
Support created an article,
CMMT14140- Jaw/Load capacity
CMMT14140- Jaw capacity has a loading capacity of 4 tons.
-
Support created an article,
What is the size of the set screw in the CMAH12A?
The below are broken up by metric and imperial. Both specs listed below are the same screw. Metric Designation: M8X1 (screw diameter X threads per millimeter) Length: 6MM Imperial D...
-
Support created an article,
What is the diameter of the tips themselves on the CMHT47412?
Please see below: Internal range 3/8 inch to 2 inches / External range 1/4 inch to 2 inches
-
Support created an article,
What bits are included in the CMHT68017?
Please see below the items included with the model in reference:
-
Support created an article,
-
Support created an article,
CMHT68017 Bits part number and sizes
The set comes with a VersaStack case, bit extender, and 1” bits which are listed below.
-
Support created an article,
Do Craftsman Batteries have a lifetime?
The typical estimated life of a Lithium-Ion battery is about two to three years or300 to 500 charge cycles, whichever occurs first. One charge cycle is a periodof use from fully charged, to fully d...
-
Support created an article,
CMCF813B Belt hook/clip
Hook part number N597001 Screw part number N587357