Power washer model CMXGWAS020733. Less two years old. Used twice, once per year.
I use stabilized gas. Left a little in over winter, and filled with fresh. Set switch to "1", connected water line, discharged air, made sure there was a steady water stream, left the spray trigger on while I pulled the starter. Tried with the spray trigger off. This is the type with the B & S engine that doesn't need to be primed or choked. Took the bowl of the carburator off (left the carb mounted, didn't want to fool with the various levers). Looked clean. There was gas in the bottom of the bowl, which I properly disposed of. Never, in 40+ years, have I had a spark plug problem, so let's assume that isn't the problem.
One person suggested it could be that the pump is frozen (not in an "ice" sense), but 2 years and 2 usages?
Any idea what is preventing this thing to start?
Please sign in to leave a comment.