Skip to main content



1 comment

  • Bryan Shelton

    Very easy mistake!  There are adaptors to go to the next size up and even down.

    • 1/4" to 3/8" (Model #CMMT13030)
    • 3/8" to 1/2" (Model #CMMT99293)
    • 1/2" to 3/4" (Model #CMMT99223)

    However, I do not believe there is a Craftsman adaptor to go from 1/4" to 1/2".  This is a big jump mechanically for the tool.  1/2" sockets typically require more torque and power from the tool which is why they make a 1/4", 3/8" and 1/2".  So adding the adapter can fix the size issue but more than likely will not fix the tools power issue.


Please sign in to leave a comment.

Powered by Zendesk